An electrical panel upgrade in Mission Viejo costs $2,500 to $6,500 for most single-family homes. A same-size panel swap sits near the low end. A 100-amp to 200-amp service upgrade with SCE coordination sits near the top. We run the load calculation, file the City of Mission Viejo permit, and schedule the utility work for you.

License #1133193

66 Google Reviews

On-Site Estimates
Why Mission Viejo Homes Need Upgrades
Mission Viejo grew fast. The first homes went on sale in 1965, and most of the city was built out by 1980. Many of those homes still run on the panel the builder installed, now 40 to 60 years old. Today those panels feed EV chargers, heat pumps, induction ranges, pool equipment, and ADUs.
We measure your actual load first. Then we size the panel and service for the loads you have and the ones you plan to add. For panel work across Orange County, see our electrical panel upgrades and replacement service.

Every estimate starts with an NEC load calculation on your home, so you pay for the panel size you need.

We confirm your panel brand and condition on site, including Federal Pacific, Zinsco, Pushmatic, and Challenger.

We file the City of Mission Viejo permit and schedule the disconnect and reconnect with your utility.
Most Mission Viejo panel upgrades cost $2,500 to $6,500. Where your job lands depends on the type of work and four conditions we check during the free estimate.
For a full price breakdown, read How Much Does a Panel Upgrade Cost in Orange County?
Typical Mission Viejo Price
$2,500 to $6,500
Mission Viejo became a city in 1988, but most of its homes went up before that. The population grew from about 13,000 in 1970 to about 55,000 by 1983. Lake Mission Viejo opened in 1978, and tracts sold out fast through the late 1970s and 1980s.
Panels from that build-out were sized for the loads of the day. These are the conditions we find most in Mission Viejo homes:
A panel upgrade usually follows a new electrical load or a problem at the panel. These are the triggers we see most in Mission Viejo homes.

Southern California Edison (SCE) serves most Mission Viejo homes. The city also lists SDG&E as a provider, so check the name on your electric bill. We coordinate with whichever utility serves your address.
SCE has to disconnect power before we swap a panel and restore it after the city signs off. A service size increase also needs an SCE service request before install day. Our office files the request and books the dates, so you do not have to call the utility yourself.
SCE also runs a program that covers utility-side costs for some homes moving from under 100 amps to no more than 200 amps for electrification projects, up to $10,000 for a single-family home. Eligibility rules apply. We help you check before you commit.
Here is what we handle with SCE:
Every panel upgrade in Mission Viejo needs an electrical permit from the city. The Building Services division reviews the work and sends an inspector before SCE restores power. We handle every step for you.
Building Services sits at City Hall, 200 Civic Center, Mission Viejo, CA 92691. See the Building Services page for counter hours and contacts.
Permit Snapshot
City of Mission Viejo Building Services
We match the panel to your load calculation. These three jobs cover most Mission Viejo homes.

Replaces 60-amp or 100-amp service with a 200-amp meter panel. Fits homes adding an EV charger, heat pump, or ADU.

Swaps an outdated or flagged panel for a new one at the same amperage when your load calculation supports it.

Adds breaker space for a garage, ADU, or workshop when your main service has capacity to spare.
Four steps, from the first visit to restored power.

Load Calculation & Estimate
A licensed electrician inspects your panel, meter, and grounding, runs the load calculation, and gives you a written price.

Permit & Utility Request
We file the City of Mission Viejo permit and submit the service request to SCE, then book your install day.

Install Day
SCE disconnects power in the morning. Our crew removes the old panel, installs the new panel and breakers, and labels every circuit.

Inspection & Power Restore
The city inspector signs off. SCE restores service, usually the same afternoon, and we walk you through your new panel.
Typical timeline: one working day on site for most Mission Viejo panel upgrades, plus city permit and SCE scheduling before install day.
Answers to the questions Mission Viejo homeowners ask most before a panel upgrade.
Most Mission Viejo panel upgrades cost $2,500 to $6,500. A same-size panel replacement sits near the low end. A 100-amp to 200-amp service upgrade with SCE coordination sits near the top. Your exact price comes after a free on-site load calculation. See our Orange County panel upgrade cost guide for the full breakdown.
Yes. The City of Mission Viejo requires an electrical permit for a panel upgrade or replacement. The city takes permits through its Client Self Service portal and inspects the work before SCE restores power. We file the permit and book the inspection for you.
Yes. SCE serves most Mission Viejo homes and has to disconnect power before the panel swap and restore it after the city inspection. A service size increase also needs an SCE service request. Our office files the request and schedules both visits. If your bill shows SDG&E, we coordinate with SDG&E instead.
Install day for most Mission Viejo homes runs one working day. SCE usually disconnects in the morning and reconnects that afternoon after the panel passes inspection. Permit approval and SCE scheduling come first and take longer for a 200-amp service upgrade than for a same-size swap.
Upgrade to 200 amps when your load calculation shows your current service near its limit, or when you plan to add an EV charger, heat pump, induction range, pool equipment, ADU, or solar with battery storage. If the calculation shows room, a same-size replacement costs less.
Have a licensed electrician confirm the brand and condition on site. Federal Pacific Stab-Lok and Zinsco panels have well-documented breaker issues, and many home inspectors and insurers flag them. We check the panel, explain what we find, and price a replacement if you want one. See our Zinsco and Federal Pacific panel replacement service.
Possibly. SCE runs a program that covers utility-side costs for some homes moving from under 100 amps to no more than 200 amps for electrification projects, up to $10,000 for a single-family home. Your panel work on the house side is still your cost. Eligibility rules apply, so we check your project against SCE requirements during the estimate.
Sometimes. If the load calculation shows enough spare capacity, we add the EV charger circuit to your existing panel. If the panel is full or the service is near its limit, you need a panel upgrade, a subpanel, or a load management device. We show you the numbers and the options during the estimate.
We upgrade electrical panels in every Mission Viejo neighborhood, from the original Deane Homes tracts to the homes around Lake Mission Viejo. For other electrical work in town, see our Mission Viejo electrician page.
Pelican Coast Electric holds a 5.0-star rating across 66 Google reviews. The reviews below come from customers across Orange County, pulled from our Google Business Profile. Call (949) 989-4404 to book your Mission Viejo panel estimate.
Ready to upgrade your panel? Our licensed electricians provide free, no-obligation estimates for electrical panel upgrades across Mission Viejo.
Get a personalized quote for your Mission Viejo electrical panel upgrade.